GFL20R/G COMPACT RECHARGEABLE HANGUN LIGHT +LASER SIGHT MOUNTING TO A HANDGUN

Battery Charging Indicator:

The low battery indicator will turn red when the light is working and the battery level is less than 20%. Connect the USB end of the charging cable to an external USB power source, It takes nearly 1.5H to fully charge the light ( For reference only. When the USB power supply is insufficient to provide 5V 0.35A power capacity, the charging time will be longer ). Please fully charge the product for the first time use.

MOUNTING GFL20 TO A HANDGUN

1. Loosen Rail-Adjustment Bolt by turning counterclockwise to adjust gap between stationary and movable Rail Guide until gap is sufficiently wide to fit over weapon accessory rail. 

2. Align Fixed Rail with weapon’s accessory rail and hinge GFL20 over the cross slot of host weapon.

3. Mate Cross member with slot in Glock rail or Picatinny rail.

*Use the included Allen wrench to remove the two socket screws to adapt to other models of firmarm.

4.Tighten Rail-Adjustment Bolt clockwise hand tight then use a coin or flat head screw driver to further tighten bolt no more than a 1/4 turn. Do NOT over tighten!

5. Green/Red Laser Calibration: Use the included Allen wrench to rotate the adjustment screws on the side of the light to calibrate the vertical or horizontal angle of the laser, and finally sight in the laser for accurate use.